|
1/350 Medium Paravane for US Navy Cruisers
|
|||||
|
by Martin J Quinn |
|||||
| NorthStar Models has released a set of Paravanes in 1/350 scale, set NSA 350094, "Medium Paravane for US Navy Cruisers". There are enough resin and photo-etch parts to make four Paravanes. | |||||
| THE PARTS | |||||
| There are 12 resin parts in the package. These parts are the body of the Paravane and the floats. The resin parts are nicely cast, with little or no flash. | |||||
|
|||||
| PHOTO-ETCH | |||||
| There is one small, very delicate photo-etch fret included, which has over 30 parts. The fret parts have relief etching. | |||||
 |
|||||
|
|||||
| Instructions are a double sided piece of paper. The directions are clear and easy to follow. The only thing you'll have to do is research where on your 1/350 US Navy cruiser the paravanes were stored. | |||||
| CONCLUSIONS | |||||
| This a nicely done set of paravanes.
They should provide a nice upgrade from injection molded parts on the various
1/350 US Navy cruisers currently available. This is North Star Models set
NSA 350094, "Medium Paravane for US Navy Cruisers". The set retails
for about $9.00 USD, and is available from many of our fine sponsors. Recommended!
Thanks to North Star Models for the review sample. |
 |
||||
