|
1/700 HMS Prince of Wales 1941.12 Wood Deck Sheet
|
||||
|
by Martin J Quinn |
||||
| Flyhawk has released a wood deck sheet for their 1/700 HMS Prince of Wales (FH1117), set FH710029, HMS Prince of Wales 1941.12 Deck Sheet. The set contains one 6.5 x 4" sheet of pre-cut wooden "deck sheet" for Prince of Wales. | ||||
|
||||
| Click to enlarge images | ||||
| The Masking Seal |
|
|||
| The pre-cut deck sheet is very thin,
so care should be used when removing it from the larger sheet.
This is self adhesive, and the backing will have to be peeled off before
applying it to your Prince of Wales.
There are six parts - the forward half the main deck, the aft half of the main deck, and four smaller parts the complete the deck around the hangar and catapult. The locations of the vents, hatches and bollards are all cut out. |
||||
|
||||
|
||||
| CONCLUSIONS | ||||
| This deck sheet is made specifically
for Flyhawk's basic Prince of Wales kit (FH1117). The
sheet is sharply cut, and easy to remove from the larger sheet. These
wood decks are also very thin, and you should be careful when removing
them from the backing and placing them on the model. For those modelers
who like to add wood decks to their models, this is an excellent looking
set, and should enhance your Prince of Wales nicely.
This is Flyhawk set FH710029, the deck sheet for their Prince of Wales kit. It retails for around $37.00. Thanks to Flyhawk for the review sample. Highly recommended. |
 |
|||
